Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Hayward, CA
Gate access control repair in Hayward typically costs $280-$620 for keypad or card-reader fixes, and $340-$780 for video intercom troubleshooting, with most calls completed same-day. The city’s dense stock of 1950s-1970s tract homes and multi-unit rentals means we see a lot of original intercom systems that have outlived their wiring, plus salt-corroded keypads along the fog-heavy Bay shoreline. If your gate isn’t responding to remotes or the keypad is dead, call (510) 879-5471 - a live person answers, and we’ll have a written price in your hands before any work starts.
Why Hayward Homes Are Different
Hayward sits on the eastern shore of San Francisco Bay, and that marine fog carries salt that eats hinges, latches, and keypad housings faster than anywhere inland. The cool, damp microclimate keeps wood gates swollen and rotting year-round. Below the surface, the Hayward Fault traces directly through residential neighborhoods from the flatlands to the hills, so gate posts tilt and concrete heaves on a schedule unrelated to normal wear. In the Jackson Triangle or around Harder Road, we’ll often find a gate dragging because the post base has shifted two degrees - not because the hinge failed. That pattern changes the diagnosis entirely, and it changes the repair.
The housing stock reinforces the problem. Thousands of post-WWII bungalows and duplexes still run original wrought iron side gates and chain-link rear enclosures that have never been replaced. After fifty-plus years, deferred maintenance is the baseline. When we get a call from Hayward, the failure is usually advanced - rusted-through tubing, seized rollers, or a motor straining against a frame that’s out of square from ground movement.
Our Main Hayward Services
We handle two specialties on this page and route to three additional Hayward service pages for homeowners who need broader work.
Gate Repair in Hayward
We repair swing gates, slide gates, and pedestrian gates across Hayward’s older housing stock, from sagging wrought iron in the flatlands to post-tilt issues near the fault trace. Every repair starts with a written price under the Haven Standard, and every visit leaves a photo record of what we found and what we fixed. Gate Repair in Hayward covers full diagnostic and restoration work.
Gate Installation in Hayward
New gate installation in Hayward accounts for seismic conditions from the start - deeper post footings, expansion-joint hardware, and frames designed to tolerate minor ground shift without binding. We measure, quote in writing, and schedule; no same-day installation. Gate Installation in Hayward details our process and material options.
Gate Motor & Opener in Hayward
We service nine automation brands on existing Hayward gates, from salt-fogged Linear operators in Shoreline developments to Viking swing arms in the hills. Motor replacement is quoted and ordered; repair is attempted first when parts are available. Gate Motor & Opener in Hayward lists brands and typical turnaround.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Hayward
Hayward’s rental-heavy housing market and older multi-unit buildings make access control a frequent call. Original intercom wiring from the 1960s and 1970s has often degraded behind stucco, and salt air corrodes keypad contacts at entry gates within five to seven years - half the lifespan you’d see in drier inland cities. We repair and replace Gate Access Control systems across the city, from single-family phone-entry units to multi-tenant card readers.
Keypad Entry
Signs you need it
Buttons stick or don’t register, the housing is cracked from UV exposure, or the gate opens without any code entered.
What it costs in Hayward
Keypad replacement runs $280-$480; repair of wiring or the control board behind it runs $180-$340.
How we do it
We test voltage at the keypad, trace the low-voltage run back to the control panel, replace the unit or repair the connection, and photograph the final wiring before sealing the housing.
Video Intercom
Signs you need it
Screen is black or flickering, audio cuts out, or the door-release relay clicks but doesn’t unlock the gate.
What it costs in Hayward
Intercom repair ranges $340-$620; full replacement with new cable pull runs $680-$1,240.
How we do it
We test signal at the gate station and the interior monitor, check the transformer output, replace failed components or pull new shielded cable, and document the wire map for the next technician.
What Gate Access Control Costs in Hayward
| Item | Typical range in Hayward |
|---|---|
| Keypad entry repair | $180-$340 |
| Keypad entry replacement | $280-$480 |
| Video intercom repair | $340-$620 |
| Video intercom replacement | $680-$1,240 |
Can you repair a keypad that got wet from fog?
Sometimes. If corrosion is limited to the contact pad, we can clean and reseal the housing for $180-$280. If the board is damaged, replacement is the only reliable fix. Call (510) 879-5471 and we’ll test it on site - estimates are free.
Do you handle intercom wiring in old stucco buildings?
Yes. We fish new low-voltage cable through existing conduit where possible, or surface-mount in metal raceway where the original run is collapsed. We photograph the path and leave a wiring diagram with the homeowner under Clause 4.
Gate Parts & Welding in Hayward
Hayward’s fifty-year-old gates are held together with rust and inertia. The salt fog attacks welds at stress points - hinge brackets, diagonal rails, post caps - and the fault-related ground movement fatigues metal faster than static loads ever would. We cut out failed sections, fabricate replacements, and weld them back with Gate Parts & Welding methods that account for the local conditions.
Hinge Replacement
Signs you need it
Gate sags on the latch side, binds against the post, or the hinge pin has visible play or rust weep.
What it costs in Hayward
Hinge replacement runs $220-$380 for standard residential brackets; heavy-duty or custom-fabricated hinges run $340-$520.
How we do it
We check post plumb first, remove the gate, cut off the old hinge, weld or bolt on the replacement, and rehang with shims to account for any tilt we can’t correct.
Post Replacement
Signs you need it
Post is visibly tilted, concrete footing is cracked and heaved, or the gate drags regardless of hinge adjustment.
What it costs in Hayward
Post replacement with new concrete footing runs $480-$820; seismic-rated deeper footing adds $180-$280.
How we do it
We excavate the old footing, set a new post with rebar and high-strength concrete below frost line, brace it plumb while curing, and attach the gate only after a 48-hour set.
What Gate Parts & Welding Costs in Hayward
| Item | Typical range in Hayward |
|---|---|
| Hinge replacement (standard) | $220-$380 |
| Hinge replacement (heavy-duty) | $340-$520 |
| Post replacement with footing | $480-$820 |
| Seismic-rated deeper footing | $180-$280 additional |
Can you weld a rusted wrought iron gate?
We can weld sound metal, but rust-weakened tubing usually needs section replacement. We cut out the rot, fabricate matching profile in steel or aluminum, and weld it in with full-penetration passes. Call (510) 879-5471 for an on-site assessment - estimates are free.
Will a new post fix my gate if the ground keeps moving?
A standard post will tilt again. We offer deeper footings with expansion hardware that tolerates minor shift without binding, documented in your job record for future reference.
Brands We Service in Hayward
We stock parts and service documentation for FAAC, BFT, Linear, and Viking operators, plus five additional major brands. Most FAAC and BFT control boards and Linear actuator arms are available within 24-48 hours for Hayward calls. our brands
Pricing for Gate Repair in Hayward, CA
| Service | Typical range in Hayward |
|---|---|
| Keypad entry repair | $180-$340 |
| Keypad entry replacement | $280-$480 |
| Video intercom repair | $340-$620 |
| Video intercom replacement | $680-$1,240 |
| Hinge replacement (standard) | $220-$380 |
| Hinge replacement (heavy-duty) | $340-$520 |
| Post replacement with footing | $480-$820 |
| Seismic-rated deeper footing | $180-$280 additional |
Prices in Hayward run higher than inland East Bay when we hit fault-related post tilt or salt-corroded hardware that needs more than standard replacement. The price we write is the price you pay - Haven Standard Clause 1, no exceptions.
Neighborhoods We Serve in Hayward
We dispatch to all Hayward neighborhoods from our Bay Area office, with same-day availability for most access control and welding calls.
- Jackson Triangle
- Harder-Tennyson
- Fairway Park
- Mount Eden
- Shoreline
Service Area - Cities Near Hayward
Our crews work the full East Bay corridor. We regularly take calls from San Leandro, CA and Oakland, CA to the north, Danville, CA and Walnut Creek, CA inland, with dispatch coordinated from our Bay Area office.
Serving Hayward, CA - Our Local Coverage Area
We’re based in the Hayward area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hayward
Most gate access control and welding calls in Hayward are scheduled same day or next day. Installation and motor replacement require measurement and ordering, so we book a free estimate visit first and then schedule the work.
Hayward requires a permit for new gate installation and for structural post replacement, but not for repair of existing hardware or access control components. We pull permits when needed and include the cost in your written quote.
Yes. We work with Hayward landlords and property managers regularly, and we leave the documented photo record with whoever meets us on site - tenant, manager, or owner. The written price goes to whoever authorizes the work.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hayward Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H.